This listing is for one brand new LCD Digital Monitor Watt Meter Ammeter RC Battery Power Volt Amp Analyser Battery Display Volt Meter Car Digital Voltage Gauge Current Power Monitor

- 100% Brand new and high quality
- PZEM-015 battery tester internal and external DC voltage current power capacity

*This meter is mainly used to test all kinds of battery's voltage, discharge current, discharge power, discharge impedance, internal resistance, capacity, dump energy, energy consumption and running time, and display the measurement data through LCD screen.

Specification:

*PZ-015: Measuring range 300A (using external shunt, can match 50A, 100A, 200A, 300A four shunts).
*Voltage measurement range: 0-200V. (When the test voltage is <8V, please use the independent power mode)
*Minimum voltage resolution: 0.01V
*Voltage start test voltage: 0.05V
*Voltage measurement accuracy: 1%
*Current minimum resolution: 1mA
*Current start test current: 10mA
*Current measurement accuracy: 1%
*Power measurement range: 0-60000W
*Power minimum resolution: 0.01W
*Power start test power: 0.2W
*Power measurement accuracy: 1%
*Impedance = voltage / current
*Impedance measurement range: 0-1000 Ω (displayed "--" when the test range or current is zero)
*Minimum impedance resolution: 0.1Ω
*Impedance measurement accuracy: 1%
*Internal Resistance Minimum resolution: 1mΩ
*Internal Resistance Measurement accuracy:1%

Dump energy is display via the battery symbol, totally 10 grids, every grid present 10% energy.
Dump energy is calculated via the current battery voltage value, before test you should preset the full voltage and the cut-off voltage
depend on the battery type; every grid voltage = (the highest voltage – the lowest voltage) / 10.
*Accumulate energy consumption
*Measuring range: 0～9999kWh (Over the test range will become zero.)
*Minimum resolution: 1Wh
Measurement accuracy:1%
(Note: 1Wh=0.001kWh=0.001 Kilowatt)

Package Contents:

1 Set DC Multimeter Battery Tester Monitor
1 x Shunt 200A